Band Pegs

Name: Band Pegs
Brand: REP Fitness
Rating: 4.46 (8 reviews)

Band Pegs are REP Fitness’s take on a simple rack accessory: solid, chrome-plated steel pegs that slide into an existing hole on a PR-4000, PR-5000, SR-4000, Omni, or Apollo upright and lock in place with a T-shaped head – no separate pin required. Sold in sets of four, they give a rack movable anchor points for banded squats, bench, and deadlifts, or just double as storage for loose bands, jump ropes, and chains. GymRadar owners (4.5 stars across 8 reviews) and an independent test from Shredded Dad both call them sturdy, easy to install, and a good value at roughly $30 for the 5/8” set. The main knock is cosmetic – some welds on the peg heads aren’t the cleanest – and they hold less securely than magnetic alternatives like Fringe Sport’s MagPegs, though neither issue undermines their core job.

Material	Chrome-plated solid steel
Mounting	T-shaped self-locking head; no pin required
Quantity	Set of four
Manufacturer	REP Fitness
Compatibility	PR-4000, PR-5000, SR-4000, Omni, Apollo racks
Usable length	8.6"
Weight 4000 series	1.1 lbs per peg
Weight 5000 series	3.3 lbs per peg
Diameter 4000 series	5/8"
Diameter 5000 series	1"

What is a Rack Attachment?

What rack attachments are

Rack attachments bolt or pin onto a power rack or squat stand to expand what it can do — J-cups and safety arms/straps (the essentials), plus dip bars, a landmine, a lat pulldown, weight-plate storage, roller J-cups, and more. They turn a rack into a whole gym.

Compatibility comes first

An attachment must match your rack’s upright size (2x2, 2x3, or 3x3) and hole pattern/hardware (e.g. 5/8-in vs 1-in holes, Westside spacing). Attachments are usually series-specific — a Monster Lite J-cup won’t fit an Echo upright — so confirm the fit before buying.

How it compares

	Band Pegs	Plate-Loaded Lat Pulldown & Low Row (4000/5000 Series)	1.25" Pull-Up Bar	Rear Base Stabilizer 2.0
GymRadar rating	4.46/5	4.45/5	4.45/5	4.45/5
Price	$34.99	$469.99	$59.99	$119.99
Material	Chrome-plated solid steel		steel	3x3" 11-gauge steel
Mounting	T-shaped self-locking head; no pin required
Quantity	Set of four
Manufacturer	REP Fitness	REP Fitness
Compatibility	PR-4000, PR-5000, SR-4000, Omni, Apollo racks
Usable length	8.6"		40.8 in
Weight 4000 series	1.1 lbs per peg
Weight 5000 series	3.3 lbs per peg
Diameter 4000 series	5/8"
Diameter 5000 series	1"

4.5/5 · 8 GymRadar reviews

Reviews by source

Expert	4.46/5	8 reviews
Retailer	4.9/5	101 reviews

REP’s Band Pegs are a simple, well-reviewed way to turn a power rack into a banded-resistance station or a home for loose bands and chains. GymRadar users (4.5 stars across 8 reviews) and an independent test from Shredded Dad tell the same story: solid chrome-plated steel that slides into an existing rack hole and locks in place without a pin. The standout dimension is value — a set of four runs about $30 for the 5/8” version — while the clear weak point is finish quality, with reviewers noting rough welds on the peg heads and less holding stability than magnetic alternatives like Fringe Sport’s MagPegs.

+Functionality: T-shaped design self-locks into a rack hole with no pin needed, securely anchoring bands for accommodating-resistance work (Shredded Dad; REP Fitness)
+Build quality: Solid chrome-plated steel construction, rated 4.7/5 by an independent reviewer (Shredded Dad)
+Value: A set of four runs about $30 (5/8" diameter) — cost-effectiveness rated 4.8/5 (Shredded Dad)
+Versatility: Doubles as rack-mounted storage for bands, jump ropes, and chains, and supports banded squats, bench, deadlifts, and Hatfield-style handles (Shredded Dad; REP Fitness)

−Build quality: "Not the nicest looking welds" on the peg heads (Shredded Dad)
−Durability: No long-term wear data beyond one review cycle
−Functionality: Less holding stability than magnetic pegs like Fringe Sport's MagPegs (Shredded Dad)

$34.99

Buy Now