Belt and Band Hanger

Name: Belt and Band Hanger
Brand: Titan Fitness
Rating: 4.89 (3 reviews)

Titan Fitness’s Belt and Band Hanger is a wall-mounted storage rack built to keep resistance bands, mini bands, collars, weight belts, and jump ropes organized and off the floor. Ten prongs made of 9-gauge powder-coated steel end in a 1” angled tip designed to keep hanging gear from sliding off, and the mounting plate carries a laser-cut TITAN logo. It ships with mounting hardware and comes in two depth options – 5” and 8” – with this listing corresponding to the 5” depth model. Independent feedback is thin (three GymRadar reviews) but uniformly positive, with reviewers calling it simple, well made, and a good value for a basic accessory rack; there’s no long-term durability data yet.

Finish	Powder-coated black
Weight	5 lbs
Material	9-gauge steel
Prong count	10
Prong specs	1" width x 5" depth, angled tip to prevent slippage
Manufacturer	Titan Fitness
Depth options	5" and 8" (this listing: 5")
Included hardware	Mounting hardware included
Mount hole spacing	22.25" inside; 16" outside; 2.5" vertical
Overall dimensions	23.5" L x 5.25" W x 4" H

What is a Storage?

What gym storage is

Storage keeps a home gym safe, tidy, and usable: weight-plate trees and pegs, barbell holders (vertical or horizontal), dumbbell and kettlebell shelves, and wall or rack-mounted organizers. Loose plates and bars on the floor are a trip-and-damage hazard; storage reclaims space and protects your equipment.

What to consider

Match storage to what you own (plate diameter, number of bars, dumbbell count) and your space — wall-mounted units and rack-hung storage save floor area, while free-standing trees move easily. Check the weight capacity and, for wall units, that you can anchor into studs.

How it compares

	Belt and Band Hanger	EVERYMATE Weight Plate Holder	The Barbell Anchor	PRX Kettlebell Storage
GymRadar rating	4.89/5	4.89/5	4.89/5	4.89/5
Price	$49.97		$99.00
Finish	Powder-coated black			Black powder coat
Weight	5 lbs		3.25 lbs
Material	9-gauge steel		0.1875" (3/16") thick steel with .234" UHMW barbell liner	Heavy-duty steel, 9mm thick
Prong count	10
Prong specs	1" width x 5" depth, angled tip to prevent slippage
Manufacturer	Titan Fitness		Darko Lifting	PRx Performance
Depth options	5" and 8" (this listing: 5")
Included hardware	Mounting hardware included
Mount hole spacing	22.25" inside; 16" outside; 2.5" vertical
Overall dimensions	23.5" L x 5.25" W x 4" H

4.9/5 · 3 GymRadar reviews

Reviews by source

Expert

4.89/5

3 reviews

Titan’s Belt and Band Hanger is a simple wall-mounted accessory rack, and the standout dimension is build quality: 9-gauge powder-coated steel with a laser-cut logo plate and ten angled prongs that reviewers describe as solid and well made. Functionality and value both score well in the limited independent feedback available – reviewers call it simple, good-looking, and reasonably priced for what it does. The weakest dimension is durability, simply because coverage is thin: only three independent reviews exist (via GymRadar) and none report long-term wear, so there’s no data on how the finish or prongs hold up over years of use.

+Build quality: 9-gauge powder-coated steel construction with a laser-cut TITAN logo plate that reviewers call well made (GymRadar)
+Functionality: angled 1" prong ends keep bands, belts, and collars from sliding off during normal use (Titan Fitness)
+Value: reviewers note it does its job well at a fair price (GymRadar)
+Versatility: ten prongs hold power bands, mini bands, collars, weight belts, and jump ropes together in one wall-mounted spot (Titan Fitness)

−Durability: only 3 independent reviews exist and none report long-term wear data, so holding power and finish durability over years of use are unverified (GymRadar)
−Functionality: no independent expert or video review breaks down installation difficulty or stud-spacing fit beyond the manufacturer's own listed mounting-hole spacing (Titan Fitness)

$49.97

Buy Now