Eisenlink Adjustable Dumbbell Rack

Eisenlink’s Adjustable Dumbbell Rack is a rolling, walk-in storage cart for adjustable dumbbells, built from commercial-grade steel with a multi-triangle support structure rated to hold 440 lbs. It ships in two heights: a Low/Short version (about 17.5” tall) for cradle-based dumbbells you drop straight down into, and a High/Tall version (about 25” tall) for base-free dumbbells like PowerBlocks or Eisenlink’s own square-plate design that need clearance to walk in and lift straight out. Both stand about 38.5” wide at the back of the tray (31.75” measured from the base) and 29” wide at the front (21” from the base), with a 24” front-to-back depth and locking caster wheels for repositioning. Each 9.25” x 21.5” tray bolts down dumbbell cradles through a multi-hole pattern intended to match common brands (Rep, Eisenlink, TrueLap, NuoBell) or, when the holes don’t line up, straps hold the cradle in place instead; a non-slip mat lets base-free dumbbells like PowerBlock or Iron Master sit directly on the tray. Tray angle is adjustable between flat and tilted, side walls are removable for wider cradles, and the frame includes storage pegs for loose weight plates plus sleeves for locking pins. Assembly takes under an hour with a socket wrench. Reviewers note the first production run’s hole spacing was slightly off for some Rep cradle models (correctable with the included straps or by using only two of the four bolt holes), and that the storage pegs aren’t UHMW-coated, so plates rub bare powder coat over time.