V2 Bumper Stacker

Name: V2 Bumper Stacker
Brand: Rogue Fitness
Rating: 3.5 (4 reviews)

The Rogue V2 Bumper Stacker is a vertical bumper-plate storage unit built around a redesigned X-shaped base instead of the tree-rack layout most plate storage uses – two 2x2” 11-gauge steel legs, 24” each, support a 36.5” loadable post, so it assembles in fewer pieces and ships cheaper than a full tree. Loading capacity runs 300-800 lbs depending on the bumper plate style being stacked. Load-bearing rubber feet come standard; an optional bolt-on caster-wheel upgrade lets the whole stack roll in and out of storage, which owners consistently recommend over the static feet. Rogue’s own buyers rate it 4.3/5 across 25 reviews, citing sturdy construction and a smaller floor footprint than tree-style racks, with occasional reports of paint flaking on the posts and the caster wheels struggling on thin, unglued gym mats.

Finish	Black powder coat with white Rogue logo
Made in	USA
Material	2x2" 11-gauge steel base legs (24" each)
Dimensions	24" L x 24" W x 39.75" H (rubber feet); 42.75" H (with caster wheels)
Post length	36.5" loadable
Base options	Standard load-bearing rubber feet, or optional bolt-on caster wheels (set of 4) for mobility
Manufacturer	Rogue Fitness
Weight capacity	300-800 lbs, depending on bumper plate style

What is a Storage?

What gym storage is

Storage keeps a home gym safe, tidy, and usable: weight-plate trees and pegs, barbell holders (vertical or horizontal), dumbbell and kettlebell shelves, and wall or rack-mounted organizers. Loose plates and bars on the floor are a trip-and-damage hazard; storage reclaims space and protects your equipment.

What to consider

Match storage to what you own (plate diameter, number of bars, dumbbell count) and your space — wall-mounted units and rack-hung storage save floor area, while free-standing trees move easily. Check the weight capacity and, for wall units, that you can anchor into studs.

How it compares

	V2 Bumper Stacker	A-Frame Olympic Plate Tree Rack	Stand for Quick-Lock Adjustable Dumbbells	Bumper Plate Weight Tree And Bar Holder
GymRadar rating	3.5/5	3.53/5	3.42/5	3.33/5
Price	$112.50	$49.99	$169.00
Finish	Black powder coat with white Rogue logo
Made in	USA
Material	2x2" 11-gauge steel base legs (24" each)		Steel frame with rubber-covered surfaces; adjustable rubber leveling feet
Dimensions	24" L x 24" W x 39.75" H (rubber feet); 42.75" H (with caster wheels)		14.5"W x 19"D x 26"H (top surface; manufacturer copy elsewhere on ironmaster.com lists 15"W x 21"D x 24"H for the same stand)
Post length	36.5" loadable
Base options	Standard load-bearing rubber feet, or optional bolt-on caster wheels (set of 4) for mobility
Manufacturer	Rogue Fitness		Ironmaster
Weight capacity	300-800 lbs, depending on bumper plate style		240 lbs total (holds a loaded pair of 120 lb dumbbells)

3.5/5 · 4 GymRadar reviews

Reviews by source

Expert	3.5/5	4 reviews
Retailer	4.3/5	25 reviews

Rogue’s V2 Bumper Stacker swaps the usual tree-rack footprint for a single 36.5” post on an X-shaped base, giving it a compact, easy-to-assemble profile that also cuts shipping cost. Rogue’s own buyers rate it 4.3/5 across 25 reviews, praising sturdy construction and better use of floor space than tree-style racks, and the fitatmidlife.com coverage that features it alongside competing stackers raises no real complaints of its own. The weakest spot is durability signal: GymRadar’s independent average sits meaningfully lower at 3.5/5 (n=4), and the only concrete long-term defect on record – paint flaking on the posts – comes from the same on-site reviews driving the higher number. Functionality is solid but conditional: the optional caster-wheel upgrade is the version owners recommend, since the base rubber feet don’t roll, and the wheels themselves can buckle and stall on thin, unglued gym mats.

+Functionality: single 36.5" post on an X-shaped base assembles quickly and gives a smaller footprint than tree-style racks (roguefitness.com; fitatmidlife.com)
+Build quality: 2x2" 11-gauge steel legs with standard load-bearing rubber feet (roguefitness.com; fitatmidlife.com)
+Versatility: rated for 300-800 lbs depending on bumper plate style, with an optional caster-wheel upgrade for rolling plates in and out of storage (roguefitness.com)
+Value: Rogue's own buyers rate it 4.3/5 across 25 reviews, calling out sturdy construction and efficient floor-space use (roguefitness.com)

−Build quality: some owners report the paint on the posts flaking off over time (roguefitness.com)
−Functionality: the caster wheels roll poorly across thin, unglued gym mats and can buckle them, stalling movement (roguefitness.com)
−Durability: independent third-party testing is thin -- GymRadar's owner average sits well below the manufacturer's own number (3.5/5 vs 4.3/5), and the only concrete wear complaint on record is the paint flaking (GymRadar; roguefitness.com)
−Functionality: the base rubber-feet version doesn't roll at all -- reviewers recommend springing for the wheeled option to get real usability (roguefitness.com)

$112.50

Buy Now