3 Bar Gun Rack™

Name: 3 Bar Gun Rack™
Brand: Rogue Fitness
Rating: 4.82 (9 reviews)

Rogue’s 3 Bar Gun Rack is a wall-mounted horizontal barbell storage bracket – a compact, half-size version of the brand’s V2 Gun Rack – built to get bars off the floor and out of the way in a garage or home gym. Precision-cut 7-gauge steel brackets support each bar by either the sleeve or shaft, and a single unit holds three barbells. Optional UHMW plastic liners are available separately to protect knurling from scuffing against the bare steel.

It mounts to any solid wall (concrete, cinder block, wood) via 0.375” holes, but ships without mounting hardware – multiple r/homegym owners note the included paper instructions describe hardware that doesn’t actually match that hole spec, so buyers should plan to source their own lag screws or wood anchors. Independent signal is positive and consistent: GymRadar rates it 4.82/5 across 9 reviews, and a hands-on installation video confirms a clean, secure mount. Fit has limits – one owner reports it doesn’t reliably hold a thicker specialty bar like an axle except in the bottom slot.

Made in	USA
Capacity	3 barbells per unit
Material	7-gauge steel brackets
Mounting	Wall-mount (concrete, cinder block, or wood); 0.375" diameter holes; hardware not included
Dimensions	17" length x 1.75" width x 5" depth
Manufacturer	Rogue Fitness
Optional accessory	UHMW plastic bar liners (sold separately)

What is a Storage?

What gym storage is

Storage keeps a home gym safe, tidy, and usable: weight-plate trees and pegs, barbell holders (vertical or horizontal), dumbbell and kettlebell shelves, and wall or rack-mounted organizers. Loose plates and bars on the floor are a trip-and-damage hazard; storage reclaims space and protects your equipment.

What to consider

Match storage to what you own (plate diameter, number of bars, dumbbell count) and your space — wall-mounted units and rack-hung storage save floor area, while free-standing trees move easily. Check the weight capacity and, for wall units, that you can anchor into studs.

How it compares

	3 Bar Gun Rack™	Monster Strip	Weight Plate Holders - T-3 and X-3 Series Racks	Gun Rack Barbell Storage
GymRadar rating	4.82/5	4.83/5	4.83/5	4.84/5
Price	$60.00	$90.00		$69.99
Made in	USA	USA
Capacity	3 barbells per unit
Material	7-gauge steel brackets	3" x 3" 11-gauge steel tubing		6-gauge steel with plastic-lined brackets
Mounting	Wall-mount (concrete, cinder block, or wood); 0.375" diameter holes; hardware not included			Wall-mount; concrete hardware included; brackets recommended 46" apart
Dimensions	17" length x 1.75" width x 5" depth
Manufacturer	Rogue Fitness	Rogue Fitness		REP Fitness
Optional accessory	UHMW plastic bar liners (sold separately)

4.8/5 · 9 GymRadar reviews

Reviews by source

Expert	4.82/5	9 reviews
Retailer	4.8/5	58 reviews
Youtube	4.5/5	1 reviews
Reddit	4.0/5	5 reviews

Rogue’s 3 Bar Gun Rack is a compact, half-size version of the brand’s V2 Gun Rack, built from 7-gauge steel to hold three barbells horizontally off the floor. Build quality is the clear standout – owners across GymRadar, a hands-on installation video, and r/homegym consistently call it sturdy, well-finished, and true to Rogue’s reputation. Value is the weakest dimension: the bracket ships without mounting hardware despite the included paper instructions describing hardware that doesn’t match the stated 0.375” hole spec, and the optional UHMW plastic liners add $20 on top of an already Rogue-priced accessory.

+Build quality: precision-cut 7-gauge steel brackets feel sturdy and finish cleanly on the wall (GymRadar, JW Fitness install video)
+Functionality: rung design securely cradles either the sleeve or shaft of a standard barbell, confirmed by multiple installers (r/homegym, manufacturer page)
+Functionality: straightforward stud-mount install for anyone with visible studs and a drill (r/homegym, JW Fitness install video)
+Versatility: optional UHMW plastic liners protect knurling for owners with premium bars (manufacturer page, r/homegym)

−Value: no mounting hardware included, and the included instructions reference hardware that doesn't match the stated 0.375" hole diameter, leaving buyers guessing (r/homegym, manufacturer on-site reviews)
−Value: UHMW plastic inserts are a separate $20 add-on some owners call pricey even by Rogue standards (manufacturer on-site reviews)
−Versatility: doesn't reliably fit thicker specialty bars like an axle -- one owner reports it only works in the bottom position (r/homegym)
−Functionality: awkward angled/diagonal reach to pull bars when mounted near other equipment in tight spaces (r/homegym)

$60.00

Buy Now