Rogue Fitness
45LB Ohio Power Bar - Stainless Steel
The stainless version of Rogue's Ohio Power Bar fixes the one real weakness of the standard [45LB...
$405.00
Buy NowThe CAP Barbell 47-Inch Olympic EZ Curl Bar is a budget-friendly, solid steel curl bar built for isolating the biceps, triceps, and forearms. Cold-drawn from 51,000 PSI tensile-strength steel with a black powder coat finish, its angled 25.4mm shaft reduces wrist and elbow strain compared to a straight Olympic barbell during curls, preacher curls, and triceps extensions. Diamond-knurled 13” grip sections on each side provide a secure, non-slip hold, and rotating bushing sleeves cut down on hand and wrist pressure. It accommodates 2-inch (Olympic) weight plates only, ships with T-screw collars included, and carries a 200 lb weight capacity – plenty for isolation work, though a ceiling for lifters chasing heavy preacher curls or close-grip pressing. It’s a no-frills, no-nonsense pick for a home gym on a curl-bar budget under $50, though the bushing (not needle-bearing) sleeves and 1-year warranty mark it as an entry-level accessory bar rather than a commercial-grade one.
Buying guide
Best Barbell for Your Home Gym — July 2026| Model | OBB-47 |
|---|---|
| Weight | 7 kg (approx. 15.5 lb) |
| Collars | T-screw collars included |
| Knurling | Diamond pattern, medium depth, 13 in per side |
| Material | Cold-drawn solid steel, black powder coat finish |
| Warranty | 1 year |
| Sleeve type | Rotating bushing sleeves |
| Manufacturer | CAP Barbell |
| Overall length | 1200mm (47 in) |
| Shaft diameter | 25.4mm |
| Weight capacity | 200 lb |
| Tensile strength | 51,000 PSI |
| Plate compatibility | 2 in (Olympic) center hole only |
| Loadable sleeve length | 7.5 in |
| Bar length between collars | 32 in |
The barbell is the center of a strength gym — the bar you squat, press, deadlift, and clean with. A men’s Olympic bar is 20 kg (44 lb) and 7.2 ft long (15 kg / 6.5 ft for women). The specs that matter: knurl (the grip texture — aggressive for pulls, milder for high-rep work), shaft diameter (28–29 mm for barbell lifts), sleeve rotation (bushings are fine for slow lifts; bearings spin fast for the Olympic lifts), tensile strength (~190k+ PSI resists bending), and coating (bare steel grips best but rusts; stainless and Cerakote trade grip for corrosion resistance).
For general lifting, a multipurpose bar (28–28.5mm shaft, dual knurl marks, no center knurl) does squats, bench, deadlifts, and the occasional clean off one bar — this is the right first barbell for most home gyms. Choose a dedicated power bar (29mm, stiffer, aggressive center-knurl grip) only once you know you’re training squat/bench/deadlift specifically and want the stiffest, grippiest tool for that job. A dedicated Olympic weightlifting bar (needle bearings, more whip) is worth it only if you clean, snatch, or jerk regularly.
Beyond your main bar, specialty bars solve specific problems rather than replacing it: a safety squat bar shifts load off sore shoulders, a trap/hex bar takes stress off a cranky lower back on pulls, and a curl bar’s camber reduces wrist strain on isolation work. Add them once you know which problem you actually have.
| 47-Inch Olympic EZ Curl Bar | Lumberjack Curl Bar | Longhorn Camber Barbell | Eleiko Oppen Bar | |
|---|---|---|---|---|
| GymRadar rating | 4.0/5 | 4.0/5 | 4.0/5 | 4.0/5 |
| Price | $49.99 | $399.00 | ||
| Model | OBB-47 | |||
| Weight | 7 kg (approx. 15.5 lb) | 55 lb | 25 kg / 55.1 lbs | |
| Collars | T-screw collars included | |||
| Knurling | Diamond pattern, medium depth, 13 in per side | Medium to slightly aggressive | ||
| Material | Cold-drawn solid steel, black powder coat finish | Carbon steel | ||
| Warranty | 1 year | Lifetime warranty against bending or breaking | 5 years | |
| Sleeve type | Rotating bushing sleeves | |||
| Manufacturer | CAP Barbell | XMark | Fringe Sport | Eleiko |
| Overall length | 1200mm (47 in) | 95" | ||
| Shaft diameter | 25.4mm | 25 mm | 32mm | |
| Weight capacity | 200 lb | 400 lbs | 1,500 lb | |
| Tensile strength | 51,000 PSI | 165,000 PSI | ||
| Plate compatibility | 2 in (Olympic) center hole only | |||
| Loadable sleeve length | 7.5 in | 6.25" | 320mm (12.6") per side | |
| Bar length between collars | 32 in |
| Expert | 4.0/5 | 4 reviews | |
| Youtube | 3.5/5 | 2 reviews |
A dependable budget Olympic EZ curl bar: cold-drawn 51,000-PSI steel, a T-screw-collar package, and an angled grip that GarageGymBuilders calls “the obvious pick” for lifters under a $50 curl-bar budget. Its standout dimensions are value and versatility – it isolates biceps, triceps, and forearms across curls, preacher curls, and extensions on any standard 2-inch Olympic plate. Build quality is the weakest dimension: an independent hands-on reviewer found a loose rattle inside the bar and wobbly end sleeves straight out of the box, and Garage Gym Reviews notes some units’ bushings rub after months of use. It’s not a bar for advanced lifters chasing heavy loads – the 200 lb capacity and bushing (not needle-bearing) sleeves cap its ceiling.
$49.99
Buy NowRogue Fitness
The stainless version of Rogue's Ohio Power Bar fixes the one real weakness of the standard [45LB...
$405.00
Buy NowBells of Steel
Bells of Steel's Powerlifting Bar is the budget powerlifting bar to beat: a **29mm, 210,000 PSI s...
$267.99
Buy NowXmaster Fitness
Xmaster Fitness