60" Axle Barbell

Name: 60" Axle Barbell
Brand: Titan Fitness
Rating: 3.83 (4 reviews)

The 60” Axle Bar is Titan Fitness’s short, fat-grip specialty barbell, built as a cheap alternative to a standard Olympic bar rather than a competitor to one. Its 1.9”/49mm shaft is roughly double the diameter of a standard bar, which taxes grip and wrist strength on bench press, deadlifts, curls, and overhead work, while the hollow one-piece steel tube stays rigid and doesn’t flex the way a loaded standard barbell does.

Reviewers consistently use it as a “beater bar” for landmine and belt-squat attachments to spare wear on a primary Olympic bar, and one owner’s two-year review of this exact 60” unit found the powder coat finish held up well with only expected wear where plates slide on. The tradeoffs are real, though: there’s no knurling, so the grip gets slick on overhead lifts, and reviewers note standard spring collars don’t clamp as tightly on the oversized shaft while calibrated plates don’t fit its sleeves snugly. At $89.97-114.99 (with sale and scratch-and-dent pricing often under $80), it’s an inexpensive way to add grip-strength variety to a home gym rather than a bar built for precision Olympic lifting.

Buying guide

Best Barbell for Your Home Gym — July 2026

Finish	Powder-coated black steel, no knurling
Weight	17-23 lb (Titan's own listing pages are inconsistent)
Warranty	1 year (non-scratch-and-dent listing only)
Handle length	43 in
Overall length	60 in
Shaft diameter	49 mm (1.9 in)
Sleeve diameter	49 mm (1.9 in)
Weight capacity	880 lb
Weight tolerance	+/- 2 lb
Plate compatibility	Standard 2in Olympic plates (calibrated plates fit loosely)
Loadable sleeve length	8 in

What is a Barbell?

What a barbell is

The barbell is the center of a strength gym — the bar you squat, press, deadlift, and clean with. A men’s Olympic bar is 20 kg (44 lb) and 7.2 ft long (15 kg / 6.5 ft for women). The specs that matter: knurl (the grip texture — aggressive for pulls, milder for high-rep work), shaft diameter (28–29 mm for barbell lifts), sleeve rotation (bushings are fine for slow lifts; bearings spin fast for the Olympic lifts), tensile strength (~190k+ PSI resists bending), and coating (bare steel grips best but rusts; stainless and Cerakote trade grip for corrosion resistance).

Which one to buy

For general lifting, a multipurpose bar (28–28.5mm shaft, dual knurl marks, no center knurl) does squats, bench, deadlifts, and the occasional clean off one bar — this is the right first barbell for most home gyms. Choose a dedicated power bar (29mm, stiffer, aggressive center-knurl grip) only once you know you’re training squat/bench/deadlift specifically and want the stiffest, grippiest tool for that job. A dedicated Olympic weightlifting bar (needle bearings, more whip) is worth it only if you clean, snatch, or jerk regularly.

Beyond your main bar, specialty bars solve specific problems rather than replacing it: a safety squat bar shifts load off sore shoulders, a trap/hex bar takes stress off a cranky lower back on pulls, and a curl bar’s camber reduces wrist strain on isolation work. Add them once you know which problem you actually have.

How it compares

	60" Axle Barbell	York Vintage Split Sleeve Power Bar	Marrs Bar - Safety Squat Bar	Rackable Camber Bar
GymRadar rating	3.83/5	3.84/5	3.84/5	3.82/5
Price	$89.97		$649.00	$269.97
Finish	Powder-coated black steel, no knurling		Black powder coat (shaft); chrome sleeves	Powder coat (shaft and sleeves)
Weight	17-23 lb (Titan's own listing pages are inconsistent)	45 lb (varies slightly by era)	65 lb	85 lb
Warranty	1 year (non-scratch-and-dent listing only)		Lifetime on manufacturing defects (padding excluded)
Handle length	43 in
Overall length	60 in		89"	88"
Shaft diameter	49 mm (1.9 in)	28-29mm (varies by production run)
Sleeve diameter	49 mm (1.9 in)	1.975" (fits standard 2" Olympic plates)	2" (Olympic; standard collars/spring clips fit)	1.95" (1 15/16")
Weight capacity	880 lb		1,200 lb	1,000 lb
Weight tolerance	+/- 2 lb
Plate compatibility	Standard 2in Olympic plates (calibrated plates fit loosely)			Olympic
Loadable sleeve length	8 in

3.8/5 · 4 GymRadar reviews

Reviews by source

Expert	3.83/5	4 reviews
Youtube	4.1/5	4 reviews

Titan’s 60” Axle Bar is a cheap, no-frills way to add fat-grip training to a home gym without beating up a primary barbell. The standout dimension is functionality: the 1.9”/49mm grip taxes forearms and wrists on presses, deadlifts, curls, and landmine work, and its hollow but rigid tube doesn’t flex the way a loaded standard bar does. The weakest dimension is versatility – reviewers note standard spring collars don’t clamp as securely on the oversized shaft and calibrated plates don’t fit snugly, which pushes it toward standard-plate, floor-based, and landmine work rather than a full precision-lifting setup. One owner’s two-year review of this exact 60” unit reports the powder coat holding up well with only expected wear at the plate-contact points, and at $89.97-114.99 (often on sale or available scratch-and-dent for under $80) it undercuts rivals like Rogue’s powder-coated Axle.

+Functionality: 1.9"/49mm fat grip builds grip and wrist strength on bench, deadlift, curls, and overhead presses (Titan manufacturer page, YouTube: Saroti)
+Functionality: hollow one-piece tube doesn't flex or bend under load the way a standard barbell does (YouTube: The Home Gym Life Project, YouTube: Saroti)
+Durability: powder coat held up well after two years of regular use on the 60in unit, with wear only where plates slide on (YouTube: Saroti)
+Value: $89.97-114.99, with sale and scratch-and-dent pricing often under $80 -- cheaper than name-brand rivals like Rogue's axle bar (YouTube: Macs 5280 Gym Equipment Reviews)
+Functionality: doubles as a landmine and belt-squat attachment, sparing wear on a primary Olympic barbell (YouTube: The Home Gym Life Project, YouTube: Saroti)

−Functionality: no center or lifting-ring markers make it harder to find hand placement compared to a standard barbell (YouTube: Saroti)
−Build quality: no knurling means a smooth, slick grip that feels insecure on overhead lifts, especially with sweaty hands (YouTube: Macs 5280 Gym Equipment Reviews)
−Versatility: standard spring collars don't clamp as tightly on the oversized 49mm shaft; latching/cam collars work better (YouTube: Macs 5280 Gym Equipment Reviews)
−Versatility: calibrated plates don't fit snugly on the sleeves, so it pairs best with standard 2in Olympic plates (YouTube: J Hogan)
−Build quality: Titan's own listing pages disagree on product weight (17 lb vs 23 lb across different pages), suggesting an inconsistent spec sheet (Titan manufacturer page, Garage Gym Reviews)

$89.97

Buy Now