Combo Rack

Name: Combo Rack
Brand: Rogue Fitness
Rating: 3.56 (6 reviews)

Rogue’s Combo Rack is a 2-in-1 squat/bench station developed with the International Powerlifting Federation, and it’s become the de facto rack seen at USAPL-affiliated meets like Raw Nationals. Two telescoping, stainless-steel-tubed uprights in 3x3” 7-gauge steel angle inward 5 degrees to fit larger athletes, and a lever-arm jack system lets lifters raise or lower the J-cups without unracking the bar – J-cup range runs 40.405”-68.405” from the floor for squats and 29.461”-57.461” for bench. It ships with four acetal-roller J-cups, two 19.5” steel safety spotter arms with diamond-tread spotter decks, and a removable competition bench with a 50” x 12.5” x 4.5” Fat Pad, all finished in MG Black powdercoat and made in the USA. At 505 lbs and a 77.25” x 80.25” footprint, it’s built for stability under heavy loading rather than a small garage, and reviewers are consistent that it’s a premium, meet-specific purchase – a budget-minded corner of the community argues a standalone rack and bench cost less for lifters who don’t need competition-spec gear.

Buying guide

Best Power Rack for Your Home Gym — July 2026

Finish	MG Black powdercoat
Height	78" (max, uprights fully extended)
Made in	USA
Material	3x3" 7-gauge steel uprights, stainless steel telescoping tubes
Footprint	77.25" L x 80.25" W (with bench)
Bench height	17.5"
Hole spacing	1" on-center
Inside width	43.5"
Certification	IPF Competition Certified
Product weight	505 lbs (550 lbs with bench, per Garage Gym Reviews)
J cup range bench	29.461" to 57.461" from floor
J cup range squat	40.405" to 68.405" from floor
Included accessories	(4) J-cups with acetal rollers, (2) steel safety spotter arms (19.5" x 3") with diamond tread spotter decks, (1) removable competition bench with 50" x 12.5" x 4.5" Fat Pad, (4) stainless steel machined pins, rubber feet and UHMW plastic protection

What is a Rack?

What a squat/folding rack is

Racks in this category trade the full four-post cage for a smaller footprint — wall-mounted fold-back racks and half-racks that squat and press without swallowing a room. A fold-back rack hinges flat against the wall between sessions, making it the go-to for shared garages. Prioritize 3x3 or Monster Lite uprights and 11-gauge steel so “space-saving” doesn’t mean “wobbly,” and confirm your wall studs can anchor it.

How it compares

	Combo Rack	Rogue Echo Squat Stand 2.0	PR-1100 Power Rack	Combo Rack - Squat and Bench Press Competition Rack
GymRadar rating	3.56/5	3.59/5	3.61/5	3.46/5
Price	$2,950.00	$485.00	$379.99	$3,150.00
Finish	MG Black powdercoat
Height	78" (max, uprights fully extended)	92 in
Made in	USA			Not USA (designed in Europe per manufacturer assembly video)
Material	3x3" 7-gauge steel uprights, stainless steel telescoping tubes
Footprint	77.25" L x 80.25" W (with bench)
Bench height	17.5"
Hole spacing	1" on-center	1 in	1 in
Inside width	43.5"
Certification	IPF Competition Certified			USAPL, USPA, IPL approved (used in ABS PRO competitions); no longer IPF-approved per community reports
Product weight	505 lbs (550 lbs with bench, per Garage Gym Reviews)
J cup range bench	29.461" to 57.461" from floor
J cup range squat	40.405" to 68.405" from floor
Included accessories	(4) J-cups with acetal rollers, (2) steel safety spotter arms (19.5" x 3") with diamond tread spotter decks, (1) removable competition bench with 50" x 12.5" x 4.5" Fat Pad, (4) stainless steel machined pins, rubber feet and UHMW plastic protection

3.6/5 · 6 GymRadar reviews

Reviews by source

Expert	3.56/5	6 reviews
Retailer	4.2/5	26 reviews
Youtube	4.5/5	3 reviews	3 videos considered with usable transcripts, all favorable. Patrick Reeves' 'ROGUE COMBO RACK REVIEW!' gives positive first impressions and assembly notes. 'Surge to New Levels'' 'Before You Buy: Combo Rack Review! Elite FTS VS Rogue Fitness' compares favorably to the Elite FTS combo rack on stability and adjustability. ATP Gym's 'Rogue combo rack flips over? - Testing safeties' load-tests the safety arms with heavy weight and concludes the wide footprint and 3x3" 7-gauge steel keep it from tipping, with only generic (not Rogue-specific) caveats about face-saver-style safeties not catching a lifter who falls backward.
Reddit	4.0/5	3 reviews	3 threads considered. A 2019 r/powerlifting USAPL Raw Nationals thread jokes lifters are 'losing 200lbs off their total' for not using the Rogue combo racks used at the meet, with a follow-up comment asking about them -- signaling meet-spec credibility. An April 2020 r/powerlifting post describes a powerlifting club lending a 'combo rack made to ipf spec' for a home setup during lockdown, reinforcing that reputation. A r/weightroom comment pushes back on value, arguing a budget rack plus separate bench is more cost-effective and questioning whether the integrated bench is worth the price.

The Rogue Combo Rack is a competition-grade 2-in-1 squat/bench rack developed with the IPF, and its meet-spec pedigree shows — Reddit threads from USAPL Raw Nationals treat it as the de facto rack at national-level competitions. Functionality stands out: the lever-arm jack system lets lifters adjust J-cup height without unloading the bar, and uprights that angle inward 5 degrees accommodate larger athletes. Build quality is solid 3”x3” 7-gauge steel with a removable competition bench, though reviewers agree it’s a premium, meet-specific purchase rather than an everyday home-gym value pick — GymRadar’s independent rating trails the manufacturer’s own on-site number, and at least one community reviewer questioned whether the integrated bench justifies the price over a standalone rack and bench.

+Functionality: lever-arm jack system adjusts J-cup height without removing plates, with uprights that angle inward 5 degrees for larger athletes (Rogue Fitness, Garage Gym Reviews)
+Versatility: IPF-certified 2-in-1 design combines a squat rack, bench press station, and removable competition bench in one footprint (Rogue Fitness, Total Shape)
+Build quality: 3"x3" 7-gauge steel construction with MG Black powdercoat and stainless steel telescoping uprights (Rogue Fitness, Total Shape)
+Functionality: recognized as meet-spec equipment at USAPL-affiliated competitions, including Raw Nationals (r/powerlifting)

−Value: premium pricing puts it out of reach for casual or beginner lifters who don't need meet-spec gear (Total Shape, r/weightroom)
−Value: a budget-minded community reviewer questioned whether the integrated bench is worth it versus a standalone rack and bench (r/weightroom)
−Durability: little independent long-term durability data beyond assembly and initial-use reviews
−Build quality: assembly takes 2-3 hours and the rack ships in 6-8 weeks (Total Shape, Rogue Fitness)

$2,950.00

Buy Now