EVO MXWS Dumbbell Stand

Name: EVO MXWS Dumbbell Stand
Brand: MX Select
Rating: 3.33 (4 reviews)

The EVO MXWS is MX Select’s dedicated stand for its EVO rapid-change dumbbell system, sized to accept the EVO MX55, MX70-100, and MX100 cradles. It ships flat-packed and assembles by bolting on a rear leg and a top cross brace, then bolting both dumbbell cradles to the top of the frame. The wide-base layout is meant to let you stand directly over the dumbbells when un-racking them, though owners who’ve lived with it note the base could stand to be wider still – it’s possible to get it shifting even on stall mats, and re-racking at an angle can feel tight.

Brand	MX Select
Assembly	Flat-packed; bolt-on rear leg and top cross brace
Footprint	30.59"L x 21.18"W x 30.83"H (77.7 x 53.8 x 78.3 cm)
Materials	Powder-coated steel frame, rubber feet
Stand weight	45.19 lb (20.5 kg)
Compatibility	EVO MX55, MX70-100, and MX100 dumbbell cradles
Combined weight (with mx55 dumbbells)	166.69 lb (75.6 kg)
Combined weight (with mx100 dumbbells)	258.38 lb (117.2 kg)

What is a Storage?

What gym storage is

Storage keeps a home gym safe, tidy, and usable: weight-plate trees and pegs, barbell holders (vertical or horizontal), dumbbell and kettlebell shelves, and wall or rack-mounted organizers. Loose plates and bars on the floor are a trip-and-damage hazard; storage reclaims space and protects your equipment.

What to consider

Match storage to what you own (plate diameter, number of bars, dumbbell count) and your space — wall-mounted units and rack-hung storage save floor area, while free-standing trees move easily. Check the weight capacity and, for wall units, that you can anchor into studs.

How it compares

	EVO MXWS Dumbbell Stand	Bumper Plate Weight Tree And Bar Holder	Stand for Quick-Lock Adjustable Dumbbells	V2 Bumper Stacker
GymRadar rating	3.33/5	3.33/5	3.42/5	3.5/5
Price			$169.00	$112.50
Brand	MX Select
Assembly	Flat-packed; bolt-on rear leg and top cross brace
Footprint	30.59"L x 21.18"W x 30.83"H (77.7 x 53.8 x 78.3 cm)
Materials	Powder-coated steel frame, rubber feet
Stand weight	45.19 lb (20.5 kg)
Compatibility	EVO MX55, MX70-100, and MX100 dumbbell cradles
Combined weight (with mx55 dumbbells)	166.69 lb (75.6 kg)
Combined weight (with mx100 dumbbells)	258.38 lb (117.2 kg)

3.3/5 · 4 GymRadar reviews

Reviews by source

Expert	3.33/5	4 reviews
Youtube	3.3/5	2 reviews

The EVO MXWS is a straightforward companion stand for MX Select’s EVO dumbbell cradles, and both independent voices found for it converge on the same weak spot: the base isn’t quite wide or planted enough. A GymRadar owner says it’s easy to get shifting even on stall mats, and a YouTube reviewer who lived with it for a month wished it were “a bit wider” after struggling to line up at an angle. Build quality and construction are solid powder-coated steel, but functionality and value both come back to that same stability complaint rather than any single design flaw.

+Build quality: powder-coated steel frame with rubber feet (manufacturer)
+Functionality: wide-base design is meant to let the lifter stand directly over the dumbbells when un-racking (manufacturer)
+Versatility: one stand fits the EVO MX55, MX70-100, and MX100 cradles, so it scales with the dumbbell set (manufacturer)
+Value: an accessory rather than a load-bearing purchase, with straightforward flat-pack assembly (bolt on the rear leg and top brace) (manufacturer, YouTube: Tommy's Basement Gym)

−Functionality: an owner reports it's "not all that hard to get this thing shifting around even on stall mats" (GymRadar)
−Functionality: a second owner independently wished the stand were "a bit wider," saying he struggles to line up at an angle when re-racking (YouTube: Tommy's Basement Gym, 1-month-later follow-up)
−Value: one reviewer calls it "really more of an afterthought with the dumbbells" and "not nearly as solid" as the dumbbells themselves (GymRadar)
−Durability: little independent long-term data beyond the two reviews found; no specific durability complaints surfaced, but coverage is thin