Hammer Sleeve Landmine Attachment

Name: Hammer Sleeve Landmine Attachment
Brand: Titan Fitness
Rating: 3.89 (3 reviews)

The Hammer Sleeve Landmine Attachment is a Titan Fitness accessory that swaps a landmine setup’s bulky 2” barbell sleeve for a slimmer 33mm grip, aimed at unilateral movements – single-arm presses, rows, hinges, and rotational work – that activate more core stability than bilateral lifts. A 3” ball handle at the end distributes load into the palm rather than the thumb joint, which lets it double as a shoulder-press handle. It’s sold in 19” and 26” lengths; the extra length over a bare barbell adds room for single-leg RDLs without the plates crowding the lifter, and a lock-down knob secures it to almost any Olympic bar.

Independent coverage is thin – a small GymRadar owner sample and a mention in a landmine-accessory roundup – but consistent: reviewers credit the narrower grip for better wrist alignment, while flagging it as a single-purpose upgrade rather than a broadly versatile tool, with one roundup calling out its price relative to how much it actually changes a workout.

Brand	Titan Fitness
Handle	3" diameter ball handle
Material	Steel construction with powder coat finish
Warranty	1-year standard warranty (extended coverage available via Mulberry)
Compatibility	Fits almost any Olympic bar
Grip diameter	33mm (1 1/3"), replacing a standard 2" barbell sleeve
Available lengths	19" or 26"
Weight 19in model	4 lb
Weight 26in model	5 lb
Sleeve inner diameter	2"
Overall length 19in model	19" (grip length 12" with ball, 9" without)

What is a Rack Attachment?

What rack attachments are

Rack attachments bolt or pin onto a power rack or squat stand to expand what it can do — J-cups and safety arms/straps (the essentials), plus dip bars, a landmine, a lat pulldown, weight-plate storage, roller J-cups, and more. They turn a rack into a whole gym.

Compatibility comes first

An attachment must match your rack’s upright size (2x2, 2x3, or 3x3) and hole pattern/hardware (e.g. 5/8-in vs 1-in holes, Westside spacing). Attachments are usually series-specific — a Monster Lite J-cup won’t fit an Echo upright — so confirm the fit before buying.

How it compares

	Hammer Sleeve Landmine Attachment	UPS Low (Universal Pulley System)	X-3 Series J-Hooks	Rogue Landmines
GymRadar rating	3.89/5	3.89/5	3.89/5	3.87/5
Price	$89.99	$275.00	$104.99	$105.00
Brand	Titan Fitness
Handle	3" diameter ball handle
Material	Steel construction with powder coat finish			7-gauge steel sleeve
Warranty	1-year standard warranty (extended coverage available via Mulberry)	Lifetime warranty on structural welds; 5-year warranty on the pulley
Compatibility	Fits almost any Olympic bar	3"x3" or 2"x3" lower crossmembers; minimum top height 6.75"; available for 1" or 5/8" hole spacing		Monster Lite and Infinity series uprights (Double Set: Infinity only)
Grip diameter	33mm (1 1/3"), replacing a standard 2" barbell sleeve
Available lengths	19" or 26"
Weight 19in model	4 lb
Weight 26in model	5 lb
Sleeve inner diameter	2"
Overall length 19in model	19" (grip length 12" with ball, 9" without)

3.9/5 · 3 GymRadar reviews

Reviews by source

Expert

3.89/5

3 reviews

Titan’s Hammer Sleeve trades the usual 2” barbell sleeve for a slimmer 33mm grip with a 3” ball handle, making it a straightforward way to add unilateral presses, rows, hinges, and rotational work to a landmine setup. Functionality is the standout — the narrower grip and extended 19”/26” length genuinely improve wrist alignment and give single-leg RDLs more clearance than a bare barbell sleeve — but versatility is also its limiting factor: independent coverage frames it as a single-purpose grip upgrade rather than a multi-exercise tool, and one roundup calls it “relatively expensive… compared to the relatively small way it changes your workouts.” Build quality (steel construction, powder coat finish) looks solid on paper, but independent coverage is thin — a 3-review GymRadar sample and one roundup mention — so durability over time is largely unverified.

+Functionality: 33mm grip (vs. a standard 2" barbell sleeve) improves wrist alignment on presses, rows, and rotational moves (manufacturer; Garage Gym Reviews)
+Functionality: Extended 19" or 26" length adds clearance for single-leg RDLs without the weight crowding the lifter (manufacturer)
+Functionality: 3" ball handle distributes load into the palm rather than the thumb joint, enabling landmine shoulder pressing that's awkward on a bare sleeve (customer feedback via manufacturer listing)
+Build quality: Steel construction with a powder coat finish and a lock-down knob for secure attachment (manufacturer; Garage Gym Reviews)

−Versatility: Editorial coverage frames it as a narrow-purpose grip upgrade — useful for presses, lateral raises, and side bends, but limited beyond that (Weight Loss Made Practical)
−Value: One roundup calls it "relatively expensive... compared to the relatively small way it changes your workouts" (Weight Loss Made Practical)
−Durability: Independent long-term coverage is thin — a 3-review GymRadar sample and one roundup mention — so durability is largely unverified

$89.99

Buy Now