Rogue Bumper Plates by Hi-Temp

Name: Rogue Bumper Plates by Hi-Temp
Brand: Rogue Fitness
Rating: 3.4 (15 reviews)

Rogue Bumper Plates by Hi-Temp have been manufactured for more than a decade at the Hi-Temp facility in Tuscumbia, Alabama – among the few American-made bumper plates on the market, and one of the most common bumpers in CrossFit boxes. They’re built from recycled vulcanized rubber crumb around a 2” stainless steel insert, with the collar inset from the plane of the plate to protect against friction and impact damage when multiple plates load the bar. Sold as individual pairs (10-45 lb) or pre-configured sets from $445 to $2,535, they carry a 1-year manufacturer warranty and a weight tolerance of +/-0.5 lb.

Independent coverage is consistent on durability – GymRadar reviewers and a gym owner with roughly a decade of near-daily class use both report years of heavy abuse with no failures – but just as consistent on a real limitation: the 445mm diameter falls short of the 450mm Olympic standard, and a thick profile (3.75” on a 45 lb plate) caps comfortable barbell loading around 405 lb, drawing complaints from powerlifting-oriented lifters in particular. The 75-durometer rubber also bounces more than Rogue’s other bumper lines, which suits CrossFit-style drops better than controlled deadlifts or rows.

Buying guide

Best Weight Plates for Your Home Gym — July 2026 Bumper Plates or Iron Plates? How to Pick Your First Set — July 2026 Do You Need Calibrated or Competition Plates? — July 2026 How Much Do Weight Plates Cost Per Pound? — July 2026 What Weight Set Should a Beginner Buy? — July 2026 Will Dropping Weights Damage Your Floor? — July 2026

Colors	Black with Rogue and Hi-Temp logos
Made in	USA (Tuscumbia, Alabama)
Diameter	445mm (below the 450mm Olympic standard)
Material	Crumb rubber (recycled vulcanized rubber) with 2" stainless steel insert
Warranty	1 year
Durometer	75
Hole diameter	2" Olympic
Weight tolerance	+/-0.5 lb
Widths by weight	10 lb: 1.37"; 15 lb: 1.87"; 25 lb: 2.25"; 35 lb: 3.12"; 45 lb: 3.75"
Set pricing range	$445-$2,535 depending on total weight
Individual pair pricing	10 lb: $55; 15 lb: $75; 25 lb: $125; 35 lb: $155; 45 lb: $195

What is a Weight Plate?

What weight plates are

Weight plates load your barbell — but “plate” covers two very different tools. Bumper plates are rubber discs around a steel hub, all the same ~450mm diameter, built to be dropped from overhead without damaging your floor or bar; they’re the default for Olympic lifting and CrossFit. Iron/steel plates are denser and thinner per pound, cheaper, and quieter to load, but most aren’t made to be dropped — better for slow, controlled powerlifting-style work.

What actually matters

Bumper vs. iron. Buy bumpers if the bar might hit the floor; iron (or rubber-coated iron) for controlled lifts and compact loading.
Weight tolerance. How far a plate strays from its stated weight (±1% is tight, ±3% loose). It barely matters for general training but adds up if you chase a specific total — which is why serious lifters add small change / fractional plates.
Collar fit & bounce. The center hole should fit your bar’s sleeve snugly; rubber durometer (around 88 Shore A) controls how “dead” a dropped plate lands.
Coating & set composition. Virgin rubber holds up and smells less than recycled crumb rubber; plan a starting set (usually a pair each of 45/25/10/5 lb plus change plates) around the lifts you actually do.

Who it’s for

Every barbell gym needs plates. Most home lifters should start with a bumper set, then add iron, change, or specialty plates as a second purchase once they know what their training is missing.

How it compares

	Rogue Bumper Plates by Hi-Temp	Echo Bumper Plates V2	HG 2.0 Bumper Plates	US-MIL Spec Bumper V2
GymRadar rating	3.4/5	4.55/5	4.45/5
Price	$55.00	$100.00	$58.00
Colors	Black with Rogue and Hi-Temp logos
Made in	USA (Tuscumbia, Alabama)
Diameter	445mm (below the 450mm Olympic standard)
Material	Crumb rubber (recycled vulcanized rubber) with 2" stainless steel insert	virgin rubber	virgin rubber	virgin rubber
Warranty	1 year
Durometer	75
Hole diameter	2" Olympic
Weight tolerance	+/-0.5 lb
Widths by weight	10 lb: 1.37"; 15 lb: 1.87"; 25 lb: 2.25"; 35 lb: 3.12"; 45 lb: 3.75"
Set pricing range	$445-$2,535 depending on total weight
Individual pair pricing	10 lb: $55; 15 lb: $75; 25 lb: $125; 35 lb: $155; 45 lb: $195

3.4/5 · 15 GymRadar reviews

Reviews by source

Expert	3.4/5	15 reviews
Retailer	4.8/5	307 reviews
Youtube	4.5/5	2 reviews	2 videos considered. "Hi temp Bumper Plate Review [almost 10 years of use]" (CrossFit Federal Hill) is a gym owner's ~10-year ownership review: "cannot recommend high temp enough," documents a responsive Rogue/Hi-Temp warranty replacement when a center ring wore out, with only cosmetic wear/looseness on the heaviest-use plates after years of commercial abuse. "Rogue Bumper Plates Review (Full Review and Comparison)!" (Chris Pinedo) is a broader comparison across Rogue's bumper lines that singles out Hi-Temp as "a lot more durable" and suited to indoor/outdoor use, though it isn't a dedicated single-product review.

Made at Rogue’s Hi-Temp plant in Tuscumbia, Alabama since the early 2010s, these recycled-rubber bumpers are one of the most common plates in CrossFit boxes – and durability is the standout dimension: reviewers and a gym owner with roughly a decade of near-daily class use converge on the same verdict, that Hi-Temps shrug off years of heavy drops on concrete and even outdoor/gravel use better than Rogue’s own pricier bumper lines. Versatility is the weakest spot: the 445mm diameter falls short of the 450mm Olympic standard, and the thick profile – 3.75” on a 45 lb plate – caps how much weight comfortably fits on a barbell sleeve, a complaint that recurs across GymRadar, Garage Gym Reviews, Garage Gym Lab, and The Barbell Spin alike, and lands hardest on powerlifting-oriented lifters loading four-plus plates per side. The high 75-durometer bounce is also livelier than competing Rogue lines, which suits CrossFit-style drops more than controlled deadlifts or rows.

+Durability: a gym owner with roughly 10 years of near-daily CrossFit-class use says he "cannot recommend high temp enough," and documents Rogue/Hi-Temp replacing worn plates under warranty after a quick email (YouTube: CrossFit Federal Hill)
+Durability: described as one of the most common bumper plates in CrossFit gyms, built to withstand abuse outdoors on rough pavement or gravel better than Rogue's other bumper lines (The Barbell Spin, YouTube: Chris Pinedo)
+Value: pairs run $55-$195 depending on weight, undercutting competition-grade alternatives while still earning a 4.5/5 "top-tier value" score from olympicweightsetreview.com
+Build quality: American-made from recycled vulcanized rubber over a 2" stainless steel insert that resists rust, within +/-0.5 lb of the stated weight tolerance (Garage Gym Reviews, Rogue product page)
+Build quality: the inset collar design protects against friction and impact damage when multiple plates are loaded on the bar (Rogue product page, GymRadar)

−Versatility: 445mm diameter falls short of the 450mm Olympic standard, creating a height mismatch when mixed with true Olympic plates (Garage Gym Reviews, garagegymproducts.com)
−Versatility: thick profile -- 3.75" on a 45 lb plate -- caps total barbell loading around 405 lb, the single most consistent complaint across GymRadar's powerlifting-oriented reviewers, Garage Gym Lab, and The Barbell Spin
−Functionality: the 75-durometer bounce is noticeably livelier than competing Rogue lines, which The Barbell Spin says can send plates "bounc[ing] all over the gym" -- a downside for controlled lifts like deadlifts and rows (The Barbell Spin, Garage Gym Lab)
−Build quality: the stainless center ring can loosen or pop out under heavy commercial use, especially on lighter 10 lb plates (garagegymproducts.com, YouTube: CrossFit Federal Hill)
−Value: costs more than Rogue's own entry-level HG 2.0 bumper line despite HG 2.0 being positioned as more basic (The Barbell Spin)

$55.00

Buy Now