Rogue Fitness
45LB Ohio Power Bar - Stainless Steel
The stainless version of Rogue's Ohio Power Bar fixes the one real weakness of the standard [45LB...
$405.00
Buy NowThe Rogue Westside Power Bar 2.0 is a 29mm competition-style powerlifting barbell co-developed with strength coach Louie Simmons and machined and assembled in Columbus, Ohio – down the road from Simmons’ Westside Barbell training facility. It shares its core specs with Rogue’s own Ohio Power Bar: a 205,000 PSI tensile strength shaft rated F8-R for virtually zero whip, bronze bushings in a snap-ring design, and powerlifting knurl marks plus a center knurl tuned to Simmons’ standard – deep and aggressive without being sharp. The 2.0 revision tightened the bushing tolerances for a quieter, smoother feel and switched to a low-profile sleeve design for easier plate loading, though reviewers note the fully black-zinc finish on the sleeves is prone to chipping and fading faster than some comparable bars. It’s backed by a lifetime warranty against bending and priced above the visually similar Ohio Power Bar mainly for the Westside branding and knurl tuning.
Buying guide
Best Barbell for Your Home Gym — July 2026| Knurl | Aggressive powerlifting knurl marks + center knurl |
|---|---|
| Weight | 45 lb (20kg) |
| Made in | Columbus, Ohio, USA |
| Bushings | Bronze bushings, snap-ring design |
| Diameter | 29mm |
| F rating | F8-R |
| Warranty | Lifetime against bending |
| Manufacturer | Rogue Fitness |
| Shaft finish | Black zinc |
| Total length | 86.52" (7 feet) |
| Sleeve finish | Proprietary matte black |
| Tensile strength | 205,000 PSI |
| Loadable sleeve length | 16.25" |
| Shaft length between sleeves | 51.5" |
The barbell is the center of a strength gym — the bar you squat, press, deadlift, and clean with. A men’s Olympic bar is 20 kg (44 lb) and 7.2 ft long (15 kg / 6.5 ft for women). The specs that matter: knurl (the grip texture — aggressive for pulls, milder for high-rep work), shaft diameter (28–29 mm for barbell lifts), sleeve rotation (bushings are fine for slow lifts; bearings spin fast for the Olympic lifts), tensile strength (~190k+ PSI resists bending), and coating (bare steel grips best but rusts; stainless and Cerakote trade grip for corrosion resistance).
For general lifting, a multipurpose bar (28–28.5mm shaft, dual knurl marks, no center knurl) does squats, bench, deadlifts, and the occasional clean off one bar — this is the right first barbell for most home gyms. Choose a dedicated power bar (29mm, stiffer, aggressive center-knurl grip) only once you know you’re training squat/bench/deadlift specifically and want the stiffest, grippiest tool for that job. A dedicated Olympic weightlifting bar (needle bearings, more whip) is worth it only if you clean, snatch, or jerk regularly.
Beyond your main bar, specialty bars solve specific problems rather than replacing it: a safety squat bar shifts load off sore shoulders, a trap/hex bar takes stress off a cranky lower back on pulls, and a curl bar’s camber reduces wrist strain on isolation work. Add them once you know which problem you actually have.
| Westside Power Bar 2.0 | Semper Fidelis Olympic Barbell - 20KG (45LB) | Stainless Steel IPF Power Lifting Chewy Bar | Super EZ Curl | |
|---|---|---|---|---|
| GymRadar rating | 4.4/5 | 4.4/5 | 4.42/5 | 4.42/5 |
| Price | $385.00 | $499.00 | $775.00 | $84.95 |
| Knurl | Aggressive powerlifting knurl marks + center knurl | |||
| Weight | 45 lb (20kg) | 20 kg (45 lb) | 20 kg | 20 lbs |
| Made in | Columbus, Ohio, USA | |||
| Bushings | Bronze bushings, snap-ring design | Dual Ollite Bronze | ||
| Diameter | 29mm | 28.5 mm | ||
| F rating | F8-R | |||
| Warranty | Lifetime against bending | Limited lifetime | 3 years | |
| Manufacturer | Rogue Fitness | The Strength Co. | American Barbell | Synergee |
| Shaft finish | Black zinc | Bright zinc with Cerakote graphic coating | ||
| Total length | 86.52" (7 feet) | |||
| Sleeve finish | Proprietary matte black | Hard chrome | ||
| Tensile strength | 205,000 PSI | 190,000 PSI | 190,000 PSI | |
| Loadable sleeve length | 16.25" | 16.5" per side | 16.338" | 6.25" per side |
| Shaft length between sleeves | 51.5" |
| Expert | 4.4/5 | 5 reviews | |
| Retailer | 4.6/5 | 55 reviews | |
| Youtube | 4.5/5 | 2 reviews |
The Rogue Westside Power Bar 2.0 is a 29mm powerlifting bar co-developed with Louie Simmons and machined in Columbus, Ohio – functionally near- identical to Rogue’s own Ohio Power Bar but wearing Westside branding, a fully black-zinc finish, and a deeper, more aggressive knurl. Its standout dimension is functionality: reviewers across text and video agree the 205,000 PSI shaft has virtually no whip, and the knurl bites hard enough that one long-term owner stopped using chalk entirely. Its weakest dimension is build quality on the finish specifically – the black zinc coating on the sleeves is reported to chip, scratch, and fade with regular loading, and the grooved sleeve design that helps retain plates without collars also makes an audible noise when loading and unloading.
$385.00
Buy NowRogue Fitness
The stainless version of Rogue's Ohio Power Bar fixes the one real weakness of the standard [45LB...
$405.00
Buy NowBells of Steel
Bells of Steel's Powerlifting Bar is the budget powerlifting bar to beat: a **29mm, 210,000 PSI s...
$267.99
Buy NowXmaster Fitness
Xmaster Fitness