Monster Mini Feet

Name: Monster Mini Feet
Brand: Rogue Fitness
Rating: 4.87 (5 reviews)

The Rogue Monster Mini Feet are a stabilizing rack attachment for Rogue’s Monster Series power racks – a compact alternative to the brand’s full-length half rack feet. Made in the USA from 3x3” 11-gauge steel with black zinc hardware, the pair bolts onto the rack’s uprights using the included 1” Monster Bolt Assemblies and extends about 13” off the mounting points, roughly half the footprint of Rogue’s half-rack feet, while still meaningfully cutting front-to-back rocking on four-post racks. The feet also add extra 1” holes for mounting band pegs, a Monster Landmine, or other rack accessories. They’re intended purely for stability and accessory mounting, not as a substitute for floor-bolting or for supporting lifts done outside the rack’s footprint – reviewers describe them as the right call for anyone who can’t or doesn’t want to bolt a rack down (renters, movers), but “overkill” if you already run a deeper six-post rack.

Color	Black
Width	3"
Height	6.75" (ground to top of foot tube)
Length	13" from mounting face
Weight	9 lb (single foot)
Made in	USA
Sold as	Pair
Hardware	(4) Black Zinc Monster 1" Bolt Assemblies included
Material	3x3" 11-gauge steel tube
Compatibility	Any Rogue Monster Series rack (1" hardware upright)

What is a Rack Attachment?

What rack attachments are

Rack attachments bolt or pin onto a power rack or squat stand to expand what it can do — J-cups and safety arms/straps (the essentials), plus dip bars, a landmine, a lat pulldown, weight-plate storage, roller J-cups, and more. They turn a rack into a whole gym.

Compatibility comes first

An attachment must match your rack’s upright size (2x2, 2x3, or 3x3) and hole pattern/hardware (e.g. 5/8-in vs 1-in holes, Westside spacing). Attachments are usually series-specific — a Monster Lite J-cup won’t fit an Echo upright — so confirm the fit before buying.

How it compares

	Monster Mini Feet	Snap-Back Rollers V 1.1 Monolift Attachment	Monster Lite J-Cup Pair - 1" Sandwich	Monster J-Cup - 1” Sandwich
GymRadar rating	4.87/5	4.87/5	4.87/5	4.86/5
Price	$140.00	$599.00
Color	Black
Width	3"
Height	6.75" (ground to top of foot tube)
Length	13" from mounting face
Weight	9 lb (single foot)
Made in	USA
Sold as	Pair
Hardware	(4) Black Zinc Monster 1" Bolt Assemblies included
Material	3x3" 11-gauge steel tube	3/8" steel with stainless hardware
Compatibility	Any Rogue Monster Series rack (1" hardware upright)

4.9/5 · 5 GymRadar reviews

Reviews by source

Expert	4.87/5	5 reviews
Retailer	4.9/5	13 reviews
Youtube	4.3/5	1 reviews	1 video considered (Basement Brandon, 'Rogue Monster Mini Feet Overview'). Consistently positive: the reviewer, who runs an RM-3 rack, praises the feet's small footprint (about 13" versus roughly 30" for Rogue's half-rack feet) and the noticeable added stability, plus the extra 1" holes for future accessories. His only real caveat is that on his own deep Monster rack the feet are 'overkill' since he doesn't need to lift outside the rack footprint -- not a complaint about the product itself.

Monster Mini Feet solve one specific problem well: adding stability to a Rogue Monster Series rack without floor-bolting it down or taking on the bulk of Rogue’s half-rack feet. Independent signal is thin – a handful of GymRadar reviews and one YouTube walkthrough – but consistently positive, with reviewers and Rogue’s own buyers reporting a noticeable reduction in front-to-back rocking on four-post racks and fit and finish matching the rest of the Monster line. Build quality and functionality are the standout dimensions; durability is the weakest simply because there’s no independent long-term wear data on a fairly simple welded-steel part. Value holds up well if you actually need the stability or the extra 1” accessory holes, and softens if you don’t – one reviewer on a deeper rack called them “overkill” for his own setup.

+Functionality: noticeably cuts front-to-back rocking on four-post Monster racks without bolting the rack to the floor (Rogue product page reviews; YouTube: Basement Brandon)
+Build quality: 3x3" 11-gauge steel, USA-made, black zinc hardware, fit and finish matching the rest of the Monster line (Rogue product page reviews)
+Versatility: adds extra 1" holes for band pegs, a Monster Landmine, or other accessories without extending the rack's full footprint (Rogue product page; YouTube: Basement Brandon)
+Value: roughly half the footprint of Rogue's half-rack feet -- a good option for renters or anyone who can't or doesn't want to bolt a rack down (YouTube: Basement Brandon)

−Durability: no independent long-term or stress-test coverage exists for this specific part beyond owner reports and one video review
−Functionality: not meant to fully anchor a rack or replace floor-bolting -- built for stability and accessory mounting, not for lifting outside the rack's footprint (YouTube: Basement Brandon)
−Value: at $140 for a stability accessory, buyers who can floor-bolt their rack get a similar benefit for the cost of anchors alone (YouTube: Basement Brandon)

$140.00

Buy Now